2
Quick Start Guide
I. Package Contents
One DSL/Cable Router
One AC/DC Power Adapter, 9VDC
One CD with user’s manual
One UTP Cable
One Multi-Language Quick Start Guide
II. How to Connect DSL/Cable Router
1.
Connect DSL or Cable modem to Router’s WAN port by using a UTP CAT. 5 straight-through
cable.
Note: Some DSL or Cable modems may use a crossover cable to connect to the Router.
2.
Connect computers to Router’s LAN ports
3.
Connect Power Adapter to Router, then power it on
III. Configuring computers on the LAN
1.
Make sure your computers equipped with an Ethernet RJ45 port.
2.
Connect computer(s) to any of Router’s LAN ports and start up the computer(s). You will
need one straight-through cable for each computer.
3.
For Windows 95/98/ME, click
Start
Settings
Control Panel
and then double-click
Network
icon.
For Windows 2000/XP, click
Start Settings Control Panel,
double-click
Network and
Dial-up Connections,
right click on the
Local Area Connections
of which is connected to
the Router, and then click
Properties
.
4.
Check the list of Network Components. Microsoft TCP/IP protocol must be installed. If not,
please install it by clicking “
Add
” button. If TCP/IP is installed, go to step
7.
5. Select
Protocol
->
Microsoft
->
TCP/IP
, and then click
OK
.
Note: System may need Windows
Setup CD to complete the installation.
6.
After installing TCP/IP, system will prompt for a restart.
7.
Go to Network dialog box again and select TCP/IP from the list of Network components, and
then click
Properties.
8.
Check each of the menu tabs and verify the following settings.
Bindings
: Select
Client for Microsoft Networks
and
File and Printer Sharing for
Microsoft Networks
.
Router
: All fields are blank.
DNS Configuration
: Select
Disable DNS
IP Address
: Select
Obtain IP address automatically
.
9.
After verification, click
OK
and exit. System may prompt you for a restart.
IV. Configuring DSL/Cable Router
1.
Open the Internet Explorer and type http://192.168.62.1 in the browser’s address box.
(192.168.62.1) is the default IP address of Router.
2.
Login screen will appear, you will see two options, “
Setup Wizard”
and “
Advanced Setup”
,
please click “
Setup Wizard
” for the first time configuration.
Note: The default login account is “
admin
” and password is “
1234
”
3.
You can configure Router quickly by clicking “
Setup Wizard”