INETVU® MOBILE SYSTEM QUICK START – COMTECH
C-COM Satellite Systems Inc.
Page 8
If you are using a Serial connection between the 7710 Controller and CDM-570/570L Satellite Modem:
1.
Connect to the ‘Remote Control’ Port using a NULL MODEM – Mail to Female Serial Cable.
2.
Ensure you have set the CDM-570/570L Remote Control to ‘SERIAL’ and 9600 bps.
Use the ◄ ► arrow keys to select Config, and then press
ENTER
.
Use the ◄ ► arrow keys to select Rem, and then press
ENTER
.
Use the ◄ ► arrow keys to select
Serial
, and then press
ENTER
.
Use the ◄ ► arrow keys to select
Interface
, and then press
ENTER
.
Use the ◄ ► arrow keys to select
RS232
, and then press
ENTER
.
Use the ◄ ► arrow keys to select
Baudrate
, and then press
ENTER
.
Edit the baud rate of the remote control bus that is connected locally to the 7710 controller.
Use the ▲ ▼ arrow keys to change the value to
9600
.
Press ENTER when done.
