background image

7

APEX INFOGRAPHIC KEY

(A) Charge Port 1:

  Low current charge input for use with the included Iner-

gy Standard Wall Charger or Apex Car Charger ONLY.  DO NOT USE FOR SOLAR 
CHARGING.

(B) Charge Port 2:

  High current charge input for use with the Inergy Apex 

Quick Wall charger and Inergy solar panels.  MAXIMUM INPUT:  UP TO 500 
WATTS, NOT TO EXCEED 26 VOLTS DC (OPEN CIRCUIT VOLTAGE, ABBREVIATED 
AS VOC) or 30 AMPS.

(C) External Battery Bank Connection:

  Battery posts for use with con-

necting external batteries.  For use with Lead Acid, AGM, Gel Cell or INERGY 
LITHIUM 12 Volt Batteries ONLY.  NEVER CONNECT A CHARGE SOURCE TO ANY 
CONNECTED EXTERNAL BATTERIES.  See page 12 (External Battery Guidelines) 
for more information.  Connector Type:  Ring Terminals.

(D) 110V AC Outlets: 

 1,000 Watts (10 Amps) maximum continuous output 

per outlet.  1,500 Watts combined total output from all outlets, 3,000 Watt 
starting surge maximum.

(E) RV Plug: 

 Outlet for connecting to RV shore power cord.  1,500 Watt max-

imum continuous output (12.5 Amps), 3,000 Watt starting surge maximum.  
Connector Type:  Nema TT-30R.

(F) 12V DC Sockets:

  180 Watts (15 Amps) maximum continuous output per 

socket.

(G) USB Ports: 

USB-C PD: 5V 3A / 9V 2A / 12V 1.5A;  USB-A QC 3.0: 5V 3A / 9V 

2A / 12V 1.5A.  NOTE: For full quick-charge or power delivery performance, the 
Apex battery must be charged over 12 Volts.

(H) Basecamp LED Light Ports:

  12V DC output.  Connect up to 10 Base-

camp LED Lights chained together per port.

(I) Power Switch: 

 3 Position rotary switch:  DC (DC ONLY MODE), ALL OFF, 

AC/DC (ALL ON MODE)

(J) Carrying Handle & Shoulder Strap

(K) LCD Display:

  Turns on with power switch in either “on” position.

(L) High Current Charge Indicator Light: 

 Illuminates when a high current 

charge source is connected to Port 2 (see above).

Storing the Apex

•The Apex will retain a charge for up to a full year, but it is rec-
ommended that the battery level is checked every 3 months 
to ensure it is not below 10%.  

Never leave in environments 

exceeding 140˚F

 (like a hot vehicle), or in damp environments.

PRO TIP:

  Storing the Apex at half charge ensures the longest 

battery life.  See page 15 (Important Notice Regarding Lithium 
Batteries) for more information about storing the Apex.

6

APEX INFOGRAPHIC

Summary of Contents for APEX











Reviews: