5 - PayMatic P2000
5. Slide the top to the back.
6. Lif t the top of the case.
For more information use the QR code or URL to watch the YouTube
instruction movie.
http://www.youtube.com/watch?v=fnpTfANu6c4
7) The housing can be installed by means of the 4 units M5 x 16
mm. screws, included in this delivery, when using a fastening
bow, or by means of 4 screws (M4 x 40mm) when fixing the
housing to the wall.
For construction follow steps 1-6 in reverse. Do not forget
to replace the included locking bolts (Stap 3)!!
Summary of Contents for PayMatic P2000
