Inepro PayMatic - Copy Coin, Technical Manual

Page: 30 / 59

Operator functions
24 - PM - Copy Coin CM7000 - Xerox Config
Function 12, Display clarity
The clarity of the display is programmed in f unction 12. The conf iguration is at 7, with f reely
programmable steps.
Function 13 and 14, Not applicable
Function 15, Counter readout without key
When y ou are putting this f unction at of f y ou can’t read out the counter automatic. Standard
is this f unction programmed at on.
Function 16, automatically erases period counters
Y ou can erase f unction C0 till C15 and C32 to put this f unction on clear and go out of the
f unction menu.
Then are these counters deleted. Standard this f unction stands at 'PCtr' (period counter)
Function 17, Not applicable
Function 18, Volume discount * Only av ailable with the optional ECOS Volume Discount
option.
·
OFF: Standard price table
·
ON: Extended price table
Function 19, Price scaling * Only av ailable with the optional ECOS Volume Discount option.
·
OFF: No price scaling
·
ON: Prices div ided by a f actor 10.
De prices that are set in f unctions 1-8 will be div ed by a f actor 10 when f unction 19 is
enabled.
So if I set a price of 45, and f unction 19 is enabled the price will be 4.5 cent.
Function 20 to 28, No applicable
Configuration functions
Function 29 and f unction 30, Menu safety
To protect the installation f unctions, a password has to be introduced in order to release these
f unctions. Af ter the correct introduction of the password in f unction 29, all higher f unctions
(f unction 31 to 100) will be released. If the correct password is introduced in f unction 30, then
the other INEPRO f unctions will be released.