18 - Konica Minolta Kit - Bizhub - 132361
Set up the copier
Set up the copier
Turn on the copier. In this chapter you will set up the copier for use with the PayCon system. Examine the exact settings
below.
Konica Minolta Bizhub 361 Series
·
Konica Minolta Bizhub 361
·
Konica Minolta Bizhub 421
·
Konica Minolta Bizhub 501
The PayCon Interface setting should be 'KoMi Serial'. (See chapter: 'Set up the PayCon' on
).
Activating the payment system:
Press <Utility/Counter>
Press <Meter Count>
Press <Check Details>
Press <stop> <0> <0> <stop> <0> <1> SERVICE MODE
Press <stop> <9>
Select <Management Function Choice>
Select <Vendor 2>
Select <Message>
Select <Type1> (for coins only) or
Select <Type2> (for cards only) or
Select <Type3> (for coin & card)
Leave the menu
21
Summary of Contents for 132361
