iNels eLAN-RF-Wi-003, Instruction Manual, Page: 9 / 17

15.11.2019 Page
9 of 17
eLAN-RF-Wi-003
02-32/2017 / rev.7
15.11.2019

By pressing the button Save settings , you can save the current settings of your eLAN-RF-Wi-003
including network settings.

The button Settings is to configure network settings that you can change any time based on your
network.
If you leave DHCP enabled selected by default, the eLAN-RF-Wi-003 always assigns you an IP
address in the range set by default (192.168.1.x).
The IP address of eLAN-RF-Wi-003 can be changed, but in the same range.
If you have your own home Wi-Fi network,
switch to Static IP and set the IP of the eLAN-RF in the
same subnet mask as you have at home. Set the default gateway the same as your network.
Press Save to store the settings. If you can connect the eLAN-RF-Wi-003 by ethernet cable into
your home network.
Note : If you change the IP address, to log into the eLAN-RF-Wi-003 you must use the new IP address.
If the new IP address that you entered is not in the same subnetwork, the connection will not work if
settings are not changed in the connected device (PC, iMM Client) to the same subnetwork.

The button Update firmware is used to update the firmware (FW).
When updating the eLAN-RF-Wi-003, proceed according to the following instructions:
1 Download the latest firmware version from the website: http://www.elkoep.com/products/inels-rf-
control/system-units/smart-rf-box-elan-rf-wi-003-8487/
2 Click on the button Update firmware , select the downloaded file (the update file must always
include the extension *.bin ), and click on it. After confirming by pressing OK , the update of your
firmware in your eLAN-RF-Wi-003 automatically starts.
Note : do not turn off device or use the Reset button when updating the firmware. the eLAN-RF-Wi-003 restarts
after updating. After the firmware update, all settings will remain preserved. This means that the set IP, login data,
visualization panel will remain the same as with the SW version prior to the update.
Perform the FW update if you
are connected to the application in the local network. Using a public address, the upgrade may not always
succeed (this also applies to VPN connections).