Operation
[email protected] | www.romanoff.com
2019-10-16
7
–2
7.2
Changing casting parts
Attention!
Switch off the machine at mains switch, when you change consum-
ables, like e.g. crucible.
7.2.1
Removal
>
Open the top plate of the casting chamber.
>
Remove “old crucible”. Check glass inductor shield.
7.2.2
Mounting
>
Check crucible surface for damages and cleanliness before you
start casting.
>
Put a small piece of quartz fleece in glass inductor shield.
Figure 35: quartz fleece in inductor shield
The crucible should be sitting easily on the
quartz fleece. The crucible collar should be
close to the glass inductor shield.
Figure 36: crucible and glass inductor shield
Place crucible with glass inductor shield in
the induction coil.
