Industrial Shields Raspberry PLC 19R+, Quick User Manual

Page: 4 / 53

Rev. 8: 29-04-2021
3
Preface
This User Guide is been implemented by Boot & Work, S.L. working
under the name Industrial Shields.
Purpose of the manual
The information contained in this manual can be used as a reference to operate and
get a better understanding of the technical data of the signal modules, power supply
modules and interface modules.
Intended Audience
This User Guide is intended for the following audience:
•
Persons in charge of introducing automation devices.
•
Persons who design automation systems.
•
Persons who install or connect automation devices.
•
Persons who manage working automation installation.
Warnings:
•
Unused pins should not be connected. Ignoring the directive may damage the
controller.
•
Before using this product, it is the r esponsibility of the user to read the product’s User
Guide and all accompanying documentation.
•
Industrial Shields PLCs must be powered between 12Vdc and 24Vdc. If a higher voltage
is supplied to the equipment can suffer irreversible damage.
•
Maintenance must be performed by qualified personnel familiarized with the
construction, operation, and hazards involved with the control.
•
Maintenance should be performed with the control out of operation and disconnected
from all sources of power.
•
The Industrial Shields Family PLCs are Open Type Controllers. It is required that you
install the Raspberry PLC in a housing, cabinet, or electric control room. Entry to the
housing, cabinet, or electric control room should be limited to authorized personnel.
•
Inside the housting, cabinet or electric control room, the Industrial Shields PLC must be
at a minimum distance from the rest of the components of a minimum of 25 cm, it can
be severely damaged.
•
Failure to follow these installation requirements could result in severe personal injury
and/or property damage. Always follow these requirements when installing Raspberry
family PLCs.