INDUSTRIAL MAID AZTech 1500iP Owner'S Manual Download Page 17

17

WARRANTY

1.  Limited Product Warranty.

  Industrial Maid, LLC, 351 S. 12th Rd., Cortland, NE, 68331, hereby 

warrants to any owner who has purchased the equipment other than for purposes of resale, as 

follows:

A. 

All components of air cleaners and air filtration equipment manufactured (collectively 

“Components”) by Industrial Maid, as well as motors and drives installed on Industrial Maid 

units (collectively “Components”) will be manufactured in conformity with stated materials, 

dimensions, and tolerances;

B.  Components manufactured by Industrial Maid, as well as motors and drives installed in 

Industrial Maid units, will, in normal use and service, be free from defects in material and 

workmanship for a period of thirty-six (36) months; 

C.  Components not manufactured by Industrial Maid (other than motors and drives) are not 

included within the thirty-six (36) month Warranty.  These excluded items include HMI 

Control Panels, motor starters, disconnects, filters, duct work, and installation not supplied by 

Industrial Maid. The Limited Product Warranty on these items, when sold by Industrial Maid 

as part of the unit, is twelve (12) months and parts only.

D.  Upon delivery, Industrial Maid will convey good and marketable title to the Components 

to Owner free and clear of all liens and encumbrances other than those arising in favor of 

Industrial Maid, including the purchase money security interest.

2.  Duration of Warranty/Notice Requirements.

 The warranties set forth in Section 1 above shall 

apply to covered defects in Components that are discovered by Owner within the respective 

thirty-six (36) months or twelve (12) months following the Invoice Date (the “Warranty Period”) 

and are reported to Industrial Maid in writing within thirty (30) calendar days following their 

discovery (the “Notice Period”). 

3.  Exceptions and Exclusions.

 Notwithstanding anything herein to the contrary, the warranties set 

forth in Section 1 above do 

not

 cover any of the following, each of which are hereby expressly 

excluded therefrom:  

A.  Defects that are not discovered during the Warranty Period;

B.  Defects that are not reported to Industrial Maid in writing within the Notice Period; 

C.  Usual and customary deterioration or wear resulting from normal use, service and exposure;

D. 

Consumable items such as filters, belts, and filter hammer are not warranted; 

E.  Any Components that are installed outside of the United States, Canada, or Mexico, United 

Kingdom and European Union; 

F. 

Any fixtures, equipment, materials, supplies, accessories, parts, or Components that have 

been manufactured and/or furnished by any third party;

G.  Any shortages in or damage to any Industrial Maid Components at delivery, all of which shall 

be exclusively governed by the invoice or Purchase Agreement;

H.  The durability and/or variation in the appearance or color of Components; 

I.  Any Components which have been removed from the Industrial Maid unit on which they were 

originally installed;

J. 

The effect or influence any Industrial Maid Components may have on any pre-existing or 

other structures, including without limitation, any damage associated with loads imposed by 

the Industrial Maid Components on such structures;

Summary of Contents for AZTech 1500iP




















Reviews: