INDRA 190105A101, Installation Manual, Page: 24 / 50

24
The other end of the ethernet cable should then be run to the house’s internet router
and cut to length.
Fit another RJ45 connector to this new end in the same manner as the previous end
and USE A NETWORK CABLE TESTER to ensure the ethernet cable is functioning
across all contacts.
If it doesn’t pass the test, then re-crimp. If it does pass, plug one end of the cable into
the female RJ45 connector on the Beaglebone within the Pioneer and the other end
into the house’s router port.
Clip the CAT5E cable to the tethered charging cable inside the charger, to prevent risk
of crushing or damage to the Motherboard