12
IC250 Pro ASSEMBLY
The bike has been assembled and tested at the factory, so you shouldn’t have any
problems putting all the parts together. Components are designed to fit together, and
only basic tools are required for the assembly process. Inside the box you will find a Tools
Pack (Hex Allen Key, Multi-tool, Washers and Bolts). See previous page.
To assemble your JLL IC250 Pro please follow these easy steps:
STEP 1
Attach the front and rear stabilizers to the
base using the bolts and washers already
found within the stabilizers.
STEP 2
Start by removing the L shaped knob from
the base then slide the seat post in.
Reattach the knob to secure at your
desired height.
Next, add the saddle on top and tighten the
bolts on both sides until the seat doesn’t
move.
