13
Mount Product on to bracket.
Tighten Grub screws to 8-10 Nm.
Mount product on to bracket
16
15
Feed cable through cable gland and tighten.
Refer to the wiring diagram to suit the
installation requirements.
Wiring
17
18
To close unit, lift the lid slightly
flip the stay so it drops into
the recess. When closing the
luminaire take care to prevent any
wires from becoming trapped.
Incorrect stay position will cause
damage to the product and will
compromise the IP rating.
Close unit
19
Close unit with a torque wrench to
7 Nm.
14
7
