1
2
Remove grub screws.
Change door to the horizontal position.
Fit grub screws. Mount product on to bracket.
Tighten grub screws to 8-10 Nm.
3
Open unit with a 5mm allen key
/ hex bit and undo the self-
retaining bolts.
Side Entry Installation
4
Stay should fall into the recess to lock the lid in the open position.
SHIM
SHIM
BLOCK
The product is supplied with a default post top and
side entry inclination setting of 0°. The observed
text on the shim and shim block are the settings.
To adjust this, refer to the inclination settings
overleaf. If no adjustment to the inclination is
necessary, go to the mounting section on page 7.
5
5
