IndigoVision Ultra 5K Fixed Camera, Quick Start Manual

Page: 16 / 24

16
To change your PC’s settings, use the Windows Network Settings
configuration application to set the PC’s IP address and subnet
mask.
Configuring your camera
Once you have changed your PC’s network settings, you must
change the IP values of the device from its factory defaults.
To change the IP address use the ONVIF configuration tool.
► For more information, see "Configure Ultra 5K Fixed Camera
using the ONVIF Configuration Utility" on page 20
Attaching the camera to the network
After configuring the camera’s IP settings, you must attach it
directly to your network using an available network port.
Use a standard RJ45 connector and CAT5 cable to connect to the
network socket in the device.
Power Supply
PC
Network
Fixed IP Camera
Cat5 cable
Figure 7 Connecting the camera to the network