IndigoVision Ultra 5K Fixed Camera, Quick Start Manual

Page: 15 / 24

15
Initial IP properties
The camera is programmed with the default IP properties:
• IP Address : 10.5.1.10
• Subnet Mask : 255.0.0.0
• Default Gateway : 10.0.0.1
Preparing an isolated network
Connect your device and the PC you are using to configure it on
their own isolated network.
To do this, connect the device to the PC using an Ethernet cross-
over cable.
Power Supply
PC
Fixed IP Camera
Cat5 Crossover
cable
Figure 6 Connecting the camera and PC using a cross-over cable
Preparing for initial device configuration
You cannot connect the camera to your network until you have
changed the IP settings to suit your network.
To change the factory defaults of your camera, you must first
(temporarily) modify your PC’s network settings.
Please make a note of the original value of all settings that are to be changed
so that you can re-enter them when you have completed the initial device
configuration.