![background image](http://html1.mh-extra.com/html/indiana-line/diva-252/diva-252_owners-manual_2053857006.webp)
All connections should be made with the amplifier
switched off.
Check that the load impedance is not lower than the
amplifier can accept.
Link the speakers by using good quality cables; the cable
cross section have to be proportionate to the length: .5
square millimeters up to three metres; 4.0 millimeters for
greater lengths.
COLLEGAMENTO
LINKING
6
Verificate che nessun filo metta in cortocircuito le uscite
degli altoparlanti. Controllate che i morsetti dei diffusori
siano ben serrati.
E’ bene che tutti i collegamenti siano fatti con
l’amplificatore spento.
Verificate che l’impedenza di carico non sia inferiore a
quella accettata dall’amplificatore.
Collegate i diffusori all’amplificatore con cavo di buona
qualità, di sezione proporzionata alla lunghezza: .5
millimetri quadri sino a tre metri; 4.0 millimetri per
lunghezze superiori.
Rispettate le polarità: eventuali errori di fase (inversione di
polarità) possono ridurre le prestazioni del sistema audio.
Abitualmente il colore rosso e/o il segno “+” indicano il
positivo, il colore nero e/o il segno “-” indicano il negativo.
Ensure that no stray strands of wire are shorting
speaker outputs together. Check that the loudspeaker
terminals are tight.
Keep the polarities: in the event of wrong phase (opposite
polarity) the performances of the audio system can be
reduced. Usually the positive is marked with the red color
and/or the “+” sign, the negative with the black and/or the
“-” sign.
Wszystkie podłączenia powinny być wykonywane przy wyłączonym amplitunerze. Sprawdź czy impedancja
obciążenia nie jest niższa niż obsługiwana przez amplituner.
Podłącz głośniki stosując przewody wysokiej jakości; przekrój kabla musi być proporcjonalny do długości:
2
,5
milimetra kwadratowego do trzech metrów;
4,0
milimetr
y
dla większych długości.
PODŁĄCZANIE
Wzmacniacz
Głośnik
Zwróć uwagę na polaryzację: w przypadku niewłaściwej fazy (przeciwna biegunowość) wydajność systemu
audio może zostać zmniejszona. Zwykle dodatni jest oznaczony kolorem czerwonym i / lub znakiem „+”,
ujemny czarnym i / lub znakiem „-”.
Upewnij się, czy żadna żyłka przewodu nie zwiera razem wyjść głośnikowych. Sprawdź, czy zaciski głośników
są dokręcone.