Instr 9928789
Rev 01 2018-07
Page 8 of 19
IIM
MPPOORRTTAANNTT
Your Indian 6.5 Inch Powerband
™
Audio Kit is exclusively designed for your vehicle. Please read the
installation instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of
debris. For your safety, and to ensure a satisfactory installation, perform all installation steps correctly in
the sequence shown.
IINNSSTTAALLLLAATTIIOONN IINNSSTTRRUUCCTTIIOONNSS
VVEEHHIICCLLEE PPRREEPPAARRAATTIIOONN
GENERAL
1. Turn key or ignition switch to “OFF” position
and remove key. If equipped with keyless fob,
remove fob from proximity of vehicle.
2. Ensure motorcycle is parked on a flat surface,
kickstand is fully extended, and vehicle is stable
prior to installation.
3. Remove seat and side covers as per owner’s
manual.
4. If equipped, remove and set aside trunk.
PPOOW
WEERR SSUUPPPPLLYY M
MOODDUULLEE IINNSSTTAALLLLAATTIIOONN
REMOVE HEADLIGHT ASSEMBLY
1. Follow corresponding step for your motorcycle.
•
Chieftain
®
–
Using a small non-marring tool, pry down
on headlight trim
A
to release tab, pull
headlight trim
A
and rubber surround
B
from fairing and carefully set aside.
•
Chieftain
®
Classic
–
Remove and retain two screws
A
and
carefully pull trim piece
B
from fairing.
