10. Personalising the name plate
11. Connection
12. Installation and commissioning
13. Operation
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Remove the cover plate [18] from the outdoor station, levering it using a
flat bladed screwdriver in the slot [27] in the lower edge (see Fig. B).
Pull the plastic cover from the name plate [24].
Write the name on the paper insert.
Replace the plastic cover.
Ensure correct connection of the individual cores. A wrong connection
will cause incorrect function.
Connect all devices according to Fig. D. 12.
Lay the connection cable and the mains adapter [17] cable in the cable
channel [9] and hang the indoor station securely on the lugs [16].
Install a 12 V DC door release according to the manufacturers
instructions.
Remove the cover plate [18] from the outdoor station, if not already
removed, levering it using a flat bladed screwdriver in the slot [27] in
the lower edge (see Fig. B).
Secure the outdoor station using the two machine screws [37] to the
fixed housing.
Replace the cover plate on to the outdoor station, by hanging it over
the top edge and then pressing downwards until all four corners are
clicked into place.
Plug the mains adapter [17] into a mains power socket.
Remove the protective film from the monitor [1].
Remove the protective film from the camera lens [20].
The video door entry system is now ready for operation.
A visitor presses the doorbell button [24] of the outdoor station. A chime
sounds at the indoor station. The camera image appears on the monitor and
sounds near the outdoor station can be heard.
If the visitor presses the doorbell button again, the chime sounds again.
Press the talk button [5] in order to speak to the visitor.
To end the conversation or to turn off the monitor press the monitor OFF
button [3], otherwise the unit will turn off automatically after approx. 2
minutes.
If you do not react to the visitor pressing the doorbell button, the monitor
image is extinguished after approx. 30 seconds.
Warning!
1. Indoor station
2. Door release (optional)
3. Installation of the outdoor station
4. Commissioning
Activation of the monitor from the indoor station
Door release (optional)
!
!
!
!
!
!
#
Press the monitor ON button [4] in order to see the camera image on the
monitor. The camera image appears on the monitor and sounds near the
outdoor station can be heard.
To turn off the monitor press the monitor OFF button [3].
If no buttons are pressed the display will turn off automatically after approx.
30 seconds.
If a door release is connected, you can release the door / gate by pressing the
door release button [2]. The door / gate is released during the time that the
button is pressed.
The door release can be actived at any time.
The unit is maintenance-free
Regularly check the technical safety and functioning
Before you clean the device, pull the mains adapter out of the mains
socket. Use a dry cloth for cleaning the surfaces. For stubborn dirt, clean
the surfaces with a soft, fluff-free, slightly moist cloth without cleaning
additives
Clean the speaker and microphone carefully with a dry brush
VT35M, Additional indoor station, part No. 27063
Packaging material, used batteries or electrical products must not be
disposed of as household waste. Use your recycling system. Details
are available from your local authority.
In addition to the statutory guarantee from the first vendor, the manufacturer
warrants this product for 2 years from date of purchase (proof from receipt)
according to following conditions.This warranty does not affect your legal
rights.
The warranty covers use of the product in normal conditions in private
households. It only covers manufacturing defects and is limited to the
replacement or repair of the faulty components. It does not include wear and
tear or batteries.
The warranty applies only when the product is used according to the
operating instructions. It does not cover damage arising from misuse,
improper handling, application of force, dust, dirt, water or other
environmental factors, or from incorrect voltage from batteries or power
supply.
The warranty is void when the product has been repaired or tampered with by
unauthorised persons and when it has been used with components which are
not specified by the manufacturer.
In case of a warranty claim please contact the vendor for details of how to
14. Maint cleaning
Optional Accessories
16. Disposal
17. Warranty
15.
GB - 24
