11
Index V4 Embosser manual
© 2012 Index Braille
3. OK (echo: Paper size)
4. Press OK (Echo Current paper size A4)
5. Press OK (Set - Echo Current paper size A4)
6. Arrow down (until echo: Letter)
7. OK, (echo: current paper size is Letter)
8. Press Menu to saves the Letter paper size (echo: menu save settings)
2.6.4
Make one copy of a section of last printed document
Make a copy of page ex. 24-42 of last printed document.
1. On the front panel of the embosser, press Menu (echo: current document)
2. Press OK (echo: emboss multiple copies)
3. Press arrow down (echo: Emboss one copy of last printed document)
4. Press OK (echo: From page, current value is one)
5. Press #10 key 2 times and #1 key 3 times
6. Press OK (echo: to page, current value is 24
7. Press #10 key 2 times and press CHS then press #1 key two times to reduce the value to 42
8. Press OK to start embossing one copies of pages 24-42
2.6.5
Make 7 copies of last printed document
1. On the front panel of the embosser, press Menu (echo: current document)
2. Press OK (echo: emboss multiple copies)
3. Press OK (echo: Give number of copies current value is one)
4. Press #1 key 6 times (echo: one....seven)
5. Press OK to start the embossing of 7 copies pages complete document
2.6.6
Set IP address from front panel
1. On the front panel of the embosser, press Menu (echo: current document)
2. Arrow down until (echo: communication)
3. Press OK (echo: network)
4. Press OK (echo: dynamic IP address, current value is on)
5. Press OK (echo: Set dynamic IP address, current value is on)
6. Arrow down (echo: off)
7. Press OK (echo: dynamic IP address, current value is off)
8. Arrow down (echo: static IP address, current value is 0,0,0,0)
9. OK (echo: set block 1, 0)
10. User the numerical keys #1 and #10 to set block 1 (sample 192)
11.OK (echo: block 2, 0) Numerical key to set block 2 (sample 168)
12.OK (echo: block 3, 0) Numerical key to set block 3 (sample 1)
13.OK (echo: block 4, 0) Numerical key to set block 4 (sample 10)
14.The arrow key may be used to move between the blocks
15.OK (echo: Static IP address current IP address is 192.168.1.10)
16.Arrow down to setup Netmask, Gateway and Dynamic name serve in the same way as the
static IP address