9
GB
Wash cycles and options
Table of wash cycles
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 8 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should
be used for garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 9 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should
be used for garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle 9 with a temperature of 40°C.
3) Synthetic program along: set wash cycle 10 with a temperature of 40°C.
W
as
h
cy
cl
es
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
M
ax
. l
oa
d
(k
g)
R
es
id
ua
l
da
m
pn
es
s
%
E
ne
rg
y
co
ns
um
pt
io
n
kW
h
To
ta
l w
at
er
lt
C
yc
le
d
ur
at
io
n
P
re
w
as
h
W
as
h
F
ab
ri
c
so
ft
en
er
B
le
ac
h
Special
1
Sport
30°
600
-
-
3,5
-
-
-
55’
2
Dark
30°
800
-
-
4
-
-
-
70’
3
Anti-odour
(Cotton)
60°
1000
-
-
3,5
-
-
-
110’
3
Anti-odour
(Synthetic)
40°
1000
-
-
3,5
-
-
-
100’
4
Delicate
30°
0
-
-
1
-
-
-
80’
5
Wool:
for wool, cashmere, etc.
40°
800
-
-
1,5
-
-
-
70’
6
Duvet:
for down-stuffed garments.
30°
1000
-
-
2
-
-
-
110’
Standard
7
Cottons with Pre-wash:
extremely soiled whites.
90°
1400
-
6
53 2,15 77 170’
8
Cotton Standard 60° (1):
heavily soiled whites and resistant colours.
60°
(Max. 90°)
1400
-
-
6
53 1,05 50 195’
9
Cotton Standard 40° (2):
lightly soiled whites and delicate colours.
40°
1400
-
-
6
53 0,86 69 180’
10
Synthetic:
heavily soiled resistant colours.
60°
800
-
-
3,5
46 0,79 46 110’
10
Synthetic (3):
lightly soiled resistant colours.
40°
800
-
-
3,5
46 0,56 46 100’
11
Coloured
40°
1400
-
-
6
53 0,89 70 100’
Eco & Rapid
12
Cotton Standard 20°:
lightly soiled whites and delicate colours.
20°
1400
-
-
6
-
-
-
170’
13
Eco Synthetic
20°
800
-
-
6
-
-
-
120’
14
Rapid
-
800
-
-
-
1,5
-
-
-
9’
14
Rapid
30°
800
-
-
3
80 0,22 34
30’
14
Rapid
60°
1000
-
-
6
-
-
-
60’
Partials
Rinse/Bleach
-
1400
-
-
6
-
-
-
50’
Spin + Drain
-
1400
-
-
-
-
6
-
-
-
25’
Wash options
Rapid
When this button is pressed the first time, the 9’ icon will
light up, when pressed the second time the 30’ icon lights
up and the third time the 1h icon lights up. When pressed
the fourth time the 9’ icon lights up again.
!
It cannot be used in conjunction with wash cycles 1-2-3-
4-5-6-7-8-9-10-11-12-13- - .
Fast Forward
During a wash programme and under certain conditions,
pressing this button allows for ending the wash
programme after only 20’ if necessary, by performing a
brief rinse cycle followed by a spin cycle at maximum 800
rpm or lower, if reduced manually during the programme
customisation phase. In this case, washing and rinsing
performance will be reduced. After pressing the button, the
relative indicator light turns on together with the indicator
light of the rinse phase. If the selected temperature is
equal to 40° and/or the button is pressed during the initial
phase of the programme, the “Fast Forward” option lasts
longer so that the detergent can dissolve properly and
avoid damaging the fabrics. In this case, the rinse phase
indicator light flashes while the wash indicator light remains
fixed until the necessary activation conditions are fulfilled.
If less than 20’ remain of the wash programme, the option
will be disabled.
!
It cannot be used in conjunction with wash cycles 2-4-5-
6-14- - .
Stain removal
This option allows for selecting the type of dirt so as to
optimally adjust the cycle for removing the stains. The
following types of dirt can be selected:
-
Food,
for stains caused by foodstuffs and beverages,
for example.
-
Work,
for grease and ink stains, for example.
-
Outdoor,
for mud and grass stains, for example.
!
The wash cycle duration varies according to the type of
selected dirt.
!
It cannot be used in conjunction with wash cycles 1-2-3-
4-5-6-7-11-12-13-14- - .
