Indesit VIA640C, Service Information

Page: 26 / 29

26 of 29
Service Manual UK
Indesit Company
English
PROGRAMMING THE POWER MODULE
These induction hobs must be programmed after the Power Module has been replaced, or to update
the Power Module to the latest version of software where required. Power Modules from SN 81101 are
programmable. If you try to programme a board which is not programmable, it will delete all the original
data which is irreversible and a new Power Module will be required.
There are two main methods.
METHOD 1 - INDESIT ENGINEERS ONLY
The appliance can be programmed via an Emit, using a USB lead (Part number C00222800),
Hardware Key (Part Number C00115587), Hardware Key Adaptor (Part Number C00255979) and
Memwriter software selecting the NEW PLATFORM option.
NOTE: -
The Black Hardware Key and USB Serial Cable will be replaced with a new style Hardware Key and
Cable which now has full USB connections. It has shorter, more robust pins, similar to those currently
fitted into the SmartCard Reader.
NOTE: - The USB Hardware Key also supports a low voltage connection point which allows an
external power supply to be connected to the Hardware Key which enables the main module to be
programmed with a settings file prior to fitting it to an appliance.
** NOT applicable to UK Service
Engineers.
continued overleaf.......
Replacement pins for the Hardware
Key are available as Part No.
C00114723 (Qty = 1)