10
GB
Start-up and use
Using the oven
!
The first time you use your appliance, heat the empty
oven with its door closed at its maximum temperature
for at least half an hour. Ensure that the room is well
ventilated before switching the oven off and opening
the oven door. The appliance may emit a slightly
unpleasant odour caused by protective substances
used during the manufacturing process burning away.
!
Before operating the product, remove all plastic film
from the sides of the appliance.
!
Never put objects directly on the bottom of the oven;
this will avoid the enamel coating being damaged.
1. Select the desired cooking mode by turning the
SELECTOR knob.
2. Select the recommended temperature for the
cooking mode or the desired temperature by turning
the THERMOSTAT knob.
A list detailing cooking modes and suggested cooking
temperatures can be found in the relevant table (
see
Oven cooking advice table
).
During cooking it is always possible to:
• Change the cooking mode by turning the
SELECTOR knob.
• Change the temperature by turning the
THERMOSTAT knob.
• Stop cooking by turning the SELECTOR knob to the
“0” position.
!
Always place cookware on the rack(s) provided.
THERMOSTAT indicator light
When this is illuminated, the oven is generating heat.
It switches off when the inside of the oven reaches
the selected temperature. At this point the light
illuminates and switches off alternately, indicating
that the thermostat is working and is maintaining the
temperature at a constant level.
Oven light
This is switched on by turning the SELECTOR knob to
any position other than “0”. It remains lit as long as the
oven is operating. By selecting
with the knob, the
light is switched on without any of the heating elements
being activated.
Electronic timer
The electronic timer displays the time and the timer
function with countdown.
Note: all the functions are operative approximately 7
seconds after they are stet.
How to reset the clock
After the appliance has been connected to the power
supply, or when the power has gone out, the clock
display will automatically reset to 0:00 and begin to
blink. 0 00
•
Press the
button, and then use the
and
buttons to set the correct time. To move the time
forward quickly, keep the buttons pressed.
Whenever the time must be reset, follow this same
procedure.
Timer Feature
Press the
button to access this function. The
symbol „ „ will appear on the display. Each time you
press button
, the time will increase by 10 seconds
until 99 minutes and 50 seconds. If you continue to
press it, the time will increase from minute to minute up
to a maximum of 10 hours.
Use button
to go backwards.
After setting the desired time, start the countdown.
When the time has elapsed, the buzzer will sound, and
it can be interrupted by pressing any of the buttons.
You can display the time by pressing button
, and symbol „ „ indicates the timer function has
been set. After approximately 7 seconds, the display
automatically goes back to indicating the timer.
To cancel a previous setting
Press button
up until 0 00.
