background image

16

GB

Service

Information on recycling and disposal 

  

As part of our continual commitment towards environmental protection, we reserve the right to use recycled quality components 
to reduce costs for our customers and to minimise materials wastage.
•  Disposing of the packaging materials: follow local regulations to allow for recycling of packaging materials.
•  In order to minimise the risk of injury to children, remove the door and plug, then cut the power supply cord flush with the 

appliance.   Dispose of these parts separately to prevent the appliance from being connected to a power supply socket.

Disposal of old household appliances

 

The European Directive 2012/19/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household 
electrical appliances must not be disposedof in the normal unsorted municipal waste stream. Old appliances must be 
collected separately in order tooptimise the recovery and recycling of the materialsthey contain and reduce the impact on 
human healthand the environment. This dryer has a sealed heat pump unit containing Fgases which should be recovered 

and destroyed.The crossed out “wheeled bin” symbol on theproduct reminds you of your obligation,thatwhen you dispose of 
the appliance it must beseparately collected.Consumers should contact their local authority orretailer for information concer-
ning the correct disposalof their old appliance.

This appliance has been designed, constructed and distributed in compliance with the 

requirements of European Directives: 

 

- LVD 2014/35/EU,  EMC 2014/30/EU  and  RoHS 2011/65/EU.

Heat Pump System

 

This dryer is fitted with a sealed heat pump system to dry 

your clothes. To operate, the heat pump contains fluorinated 

greenhouse gases ( F gases) which are covered by the Kyoto 

Protocol. These F gases are contained in a hermetically 

sealed unit. This sealed unit contains          kg of the F gas 

R134a which acts as a refrigerant. GWP = 1430 (0.4 t C02).

If the sealed unit fails then it must be replaced by a new 

sealed unit. Contact your nearest service centre for advise.

Note:

 The gases contained in the sealed unit are not 

hazardous to health, but if they escape they will have an 

impact on global warming.

Before calling the Service Centre:

 

• Use the troubleshooting guide to see if you can solve the 

problem yourself 

(see Troubleshooting). 

• If not, turn off the dryer and call the Service Centre closest to 

you. 

Spare Parts

This dryer is a complex machine. Repairing it yourself or 

having a nonauthorised person try to repair it could cause 

harm to one or more persons and to the machine, and could 

invalidate the spare parts warranty. 

Call an authorised technician if you experience problems 

while using the machine. 

Please note that it is an offence for an unqualified person 

to undertaken any servicing or repair work that involves 

breaking into the sealed heat pump unit.

What to tell the Service Centre:

• Name, address, and post code; 

• telephone number; 

• the type of problem; 

• the date of purchase; 

• the appliance model (Mod.); 

• the dryer serial number (S/N). 

This information can be found on the data label inside the 

door of the machine.

0,29

Summary of Contents for EDPE 945 A2

















Reviews: