Indesit DFG 26T1 Operating Instructions Manual Download Page 16

Page: 16 / 16

Indesit Company Spa

Viale Aristide Merloni 47

60044 Fabriano (AN)

Italy

195135001.00 - NC

09/2015 jk - Xerox Fabriano

Assistance

Before contacting Assistance:

• Check whether the problem can be resolved using the Troubleshooting guide

(see Troubleshooting).

• Restart the programme to check whether the problem has ceased to exist.
• If the problem persists, contact the Authorised Technical Assistance Service.

Never use the services of unauthorised technicians.

Please have the following information to hand:

•  The type of malfunction.
•  The appliance model (Mod.).
•  The serial number (S/N).

This information can be found on the appliance data plate

(see Description of the appliance)

Assistance

Indesit Priority Service

Genuine Accessories & Spare Parts

Australia Phone: 1300 055 518

Australia Phone: 02 97143434

Australia Email:[email protected]

New Zeland Phone: 0800 367 835

New Zeland Phone: 09 307 42 05 / 0800 367 835

New Zeland Email:[email protected]

AUSTRALIA

NEW ZELAND

BUSH AUSTRALIA PTY LIMITED

EUROTECH DESIGN LIMITED

46 Buffalo Road, Gladesville

NSW 2111, Australia

Email: [email protected]

604 Rosebank Road, Avondale,

Auckland, New Zeland

Email: [email protected]

Summary of Contents for DFG 26T1

















Search results

Summary of Contents for DFG 26T1

Reviews:

Related manuals for DFG 26T1

Brands by name

Popular brands

Indesit DFG 26T1, Operating Instructions Manual

Search results

Summary of Contents for DFG 26T1

Reviews:

Related manuals for DFG 26T1

Brands by name

Popular brands