1
GB
Safety Is a Good Habit to Get Into
NOTICE
Carefully read the instructions contained in this manual,
as they provide important information which is essential
to safe and proper installation, use and maintenance of
the appliance.
This appliance complies with the following
EEC directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and
subsequent modifications;
- 89/336/EEC of 03/05/89 (Electromagnetic
Compatibility) and subsequent modifications.
1
.Carefully dispose of the packing material.
2
.After removing the packing, check to make sure that
the appliance is not damaged. If in doubt, contact a
qualified professional.
3
.The dishwasher must only be used by adults for the
washing of household dishes and cooking utensils.
4.
Fundamental rules to follow when using the appliance:
- Never touch the dishwasher when barefoot or with wet
hands or feet;
- We discourage the use of extension cords and multiple
sockets;
- During installation, the power supply cord must not be
excessively or dangerously bent or flattened;
- If the appliance is not operating properly or maintenance
must be performed, disconnect the appliance from the
power supply.
5
.Keep detergents out of the reach of children, who must
also be kept away from the dishwasher when it is open.
To maintain the EFFICIENCY and SAFETY of this
appliance, we recommend:
l
call only the Service Centers authorized
by the manufacturer
l
always use original Spare Parts
6
.This appliance cannot be installed outdoors, not even if
the area in which it is installed is covered by a roof; it is also
very dangerous to leave it exposed to the rain and elements.
7
.Do not touch the heating element during or after a wash
cycle.
8
.Do not lean or sit on the door when it is open, as this
could overturn the dishwasher.
9
.If the appliance malfunctions, turn off water supply to
the appliance and disconnect the plug from the wall socket.
Then, consult the section entitled, "Troubleshooting." If you
cannot resolve the problem, contact a service centre.
10
.Appliances which are no longer being used must be
made inoperable by cutting the power supply cord and
removing the door lock.
