iD-HC SERIES: INSTALLATION & OPERATION MANUAL
PAGE 2
Thank you for choosing inDESIGN iD-HC power amplifiers for your
application. Please spare some time to read the contents of this
manual, so you can obtain the best possible performance and
longevity of the product/s.
The inDESIGN iD-HC power amplifier series is a high powered
efficient 2 Stage, Class H amplifier design-built for demanding
mobile live sound and permanent installation amplification
applications.
Each model features min. 4 ohms load, bridging @ 8 ohms,
switchable input sensitivity, soft start, DC protection, short circuit
protection, clip limiter and thermal overload protection.
Maintenance is a breeze with removal – washable front filters via
the front panel. The weight is due to large transformers – sorry
about that... at least your amps will have a long service life!
INTRODUCTION
INTRODUCTION
2
IMPORTANT SAFETY
INSTRUCTIONS 3
FRONT PANEL
4
REAR PANEL
5
MAINTENANCE 6
AMPLIFIER COOLING 7
SPECIFICATIONS
8
WARRANTY INFO 11-12
CONTENTS
Electrical and Safety Warnings
THESE SERVICE INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY.
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING
OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS
UNLESS YOU ARE QUALIFIED TO DO SO.
CAUTION
The lightening flash with arrowhead
symbol, with an equilateral triangle,
is intended to alert the user to the
presence of un-insulated
“dangerous voltage” within the products
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
WARNING:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRICAL SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
