7. Arrange panel 8.
8. Arrange panel 7. This panel is shorter!
9. Arrange panel 6. This panel is shorter!
10. Arrange panel 5.
11. Arrange panel 4.
12. Arrange panel 3.
3. Separate the suspension lines from the risers and check
that they are not crossed.
Steering lines and lines to the nose (yellow arrows), center
lines (red arrows), lateral suspension lines (green arrows).
17. Packing the parachute
4. Separate the lines up to the canopy. The red nose points
upwards.
1. Set the pre-brake of the control handles. Teh steering
lines have an eye at 40 cm. Through this the hard part of the
control handle is insertet (red arrow). Insert in the fixation
rubber band above control handle and jut out steering line
(yellow arrow).
5. Tighten the suspension lines and lay all panels on the
right side, to that panel 10 is as shown in the picture.
6. Place panel 10 centered to the floor and arrange panel 9 to
the side. Arrange upper part of panel 9 so far that it forms a
trapeze.
2. Slid on the numbered packing loops on a packing cord
and hook in the packing cord. The Trigon 100 has 16
packing cords, Trigon 125 has 20.
The following pictures show a Triogon 125.
8
9
Summary of Contents for Trigon
Page 16: ......