INDELAC CONTROLS NEMA 4, Assembly, Installation, Operation & Maintenance Manual

Page: 2 / 20

Electric Fail-Safe Device Installation, Operation & Maintenance Manual, 3A
Page 2
INTRODUCTION:
Thank you for selecting Indelac Controls, Inc. (ICI) for your UPS / Battery Backup System needs. We at ICI are
proud of our products and feel confident they will meet or exceed your expectations of quality and reliability.
Every precaution has been taken to insure that your equipment will arrive undamaged; however, accidents do
occur. Therefore, the first thing you must do upon receipt of your package is to inspect it for damage. If the
box is damaged there is a possibility that the equipment inside the box may be damaged as well. If this is the
case
YOU MUST FILE A CLAIM with the delivering CARRIER . All shipments are F.O.B. our factory and it is
YOUR RESPONSIBILITY to file a claim for damages.
NOTE: ICI’S ELECTRIC FAIL-SAFE DEVICE MAY BE USED WITH OTHER BRANDS
OF ELECTRIC ACTUATORS - ACTUATOR TERMINAL CONNECTIONS WILL NOT
BE THE SAME. CONTACT SALES TO VERFY APPLICATION FIT.
STORAGE:
If the Fail-Safe Device is scheduled for installation at a later date:
1. Store off the floor protect with unsealed cover allowing for side and bottom ventilation. In the
event that the unit is going to be stored where there is insufficient temperature control internal
heaters must be installed and energized to protect the unit from condensation and extreme
temperature variations.
2. Store in a climate controlled building.
3. Store in a clean and dry area.
4. See the Maintenance Section in this Manual for Proper Care of the Battery.
FOR FUTURE REFERENCE RECORD:
1. Fail-Safe model number
2. Fail-Safe enclosure type NEMA 4_____, NEMA 4X_____, NEMA 7_____.
3. Fail-Safe output Voltage
4. Fail-Safe serial number
5. Date of installation Put into operation