Indel Webasto Free Line Elegance Isotherm FR115, Installation And Usage Instructions

Page: 48 / 244

User Manual
48
4.2 Ventilation
It is extremely important for the compressor/condensing unit located behind the
refrigerator to be well ventilated so that the fresh air can enter at the bottom and
pass behind the refrigerator, with the hot air being allowed to escape from the top
or sides (Fig. 1). The illustrations (Fig. 2-3) show an example of how the refrigerator
housing should be set.
4.3 Door Panelling
To change door panelling on Free Line Elegance models, delicately remove the
4 lateral panel locking strips, remove the small handle frame and then it will be
possible to remove the panel. Insert the new panel and delicately reinstall the lateral
strips and the handle frame (Fig. 7).
This procedure is illustrated on our “Indel Webasto Marine” channel.
4.4 Door Reversibility
The opening direction of Isotherm Free Line Elegance refrigerator doors can be
reversed to meet installation requirements.
To reverse the opening direction of the door, remove the screws securing the top and
the fastening pins, remove the door, reverse the fastening hinges as illustrated (Fig.
5) and re-insert the door and re-tighten all parts.