Indel B CR86, Instructions For Use Manual, Page: 13 / 42

13
E
N
G
LI
S
H
ASSEMBLY
The refrigerator is designed for built-in installation.
The refrigerator can be fixed in place using:
•
Three flanges supplied as optional and sold separately;
• Four screws that can be screwed into the internal walls of the refrigerator and the walls
of the housing;
It is very important for the refrigerating unit, consisting of the compressor and the condenser,
to be well ventilated, with the cool air coming in from the bottom and going out from the top.
You must ensure proper ventilation of the refrigerating unit. The air inlets and outlets must have
a free cross section of at least 200 cm
2
. (see ventilation diagrams in Fig. 3-4).
INSTALLING THE REFRIGER ATOR
NOTE!
The fixing flanges are optional extras and are sold separately from the refrigerator.
The refrigerator is designed so that three flanges can be fixed to the front section (two at the
sides and one on top).
The flanges are supplied in a kit which includes the fixing screws. The side flanges are fixed to
the refrigerator with 4 screws each, while the top flange is fixed with 3 screws.
Once the fridge is positioned inside the housing cabinet, it can be fixed in place by means of
the side flanges (3 screws each).