background image

 

HFL-500-E/HFL-600-

E User’s Manual

 

 

Page 21 of 24 

IL-HFL-500/600-E UM 

  Copyright 2022 IndeeLift Inc. All Rights Reserved 

04/07/2022 

 

 

6.

 

While remaining fully upright, one emergency responder stands behind the HFL with one foot on 
the back of the HFL, then both responders lift slightly while sliding the patient to the center of the 

HFL’s seat.  

NOTE: Remain in a fully standing position while sliding the patient, (to avoid any 

bending or back strain).

 

The remaining steps on the next page are very similar to those covered in the 

Standard Lift Procedure

 and 

Mount Assist Procedure

.  

    

7.

 

Once the patient is properly positioned in the center of th

e HFL’s seat 

as far back on the seat as 

possible, (where their back is resting on the HFL’s vertical frame), set the carrying straps to either 

side of the HFL and ask the patient to lift their arms slightly and, using one of the belt assemblies 
as a waist belt (i.e., secured to the lower anchor points), position the belt around the 

patient’s 

waist, buckle the seat belt and remove any slack.   

8.

 

With one emergency responder positioned behind the HFL, ask the patient if they are ready to be 
lifted. Once they are ready, press the up/down rocker switch upward and hold the switch in the 
up position. The seat will rise for approximately sixty seconds and then stop. 

9.

 

When the lift has stopped, allow the pati

ent to rest if needed, ensure the patient’s feet are 

positioned properly for standing, unbuckle the seat belt then offer to assist the patient as they 
stand up from the seat, (as they would from any chair). NOTE: If the patient requires transport 
(e.g., to a waiting gurney), utilize the 

Patient Transport Procedure

 starting on page 11.     

10.

 

Once the fallen patient has been recovered, fold then roll the IndeeChuck back to its stowable 
configuration, place it back in the storage bag on the HFL and return the seat to the fully 
downward (home) position before rolling the HFL back to the emergency apparatus.  

NOTE: Always ensure there are no foreign objects below the seat before returning it to the 

home position.

  

 

    

   

   

   

   

   

               

                 

     

     

     

                  

Summary of Contents for HFL-500-E

























Reviews: