Incy Interiors Georgia 1515-1 Manual Download Page 6

 

Care & Maintenance 

 

When cleaning your crib, use a non-toxic, non-abrasive cleaner. Mix a solution of water with a 
small amount of a mild detergent. Apply to crib surface with a damp cloth. 

 

When moving the crib without castors assembled, always lifts the unit. Do not push or drag it 
to avoid damaging the base. 

 

It is important that the humidity levels in the room be controlled from extremes of too much 
humidity or too little. The crib should not be placed directly next to air-conditioning, outlets, 
fire places, radiators, space heaters, humidifiers, or dehumidifiers. Exposure to extreme 
variations of temperature and humidity can damage wood products. 

 

Keep the crib out of direct sunlight. UV rays may fade colours and in some cases darken them. 
It can cause crazing or hair line cracks in the finish. White finishes will darken naturally over 
time and exposure to direct sunlight will hasten this natural process along with some wood 
darkening; this is not considered to be a quality defect. 

 

If you need to put your crib in storage for any period of time do not store it in a damp or hot 
environment. Allow air flow around the furniture and do not stack anything on it. 

 
Check List 

 

Always check the crib is free from damage before use. Do not use product if any damage is 
present. 

 

Regularly check that all assembly fittings are always tightened properly and retighten as 
necessary. 

 
After Sales Customer Service 

When you receive your Incy Interiors product, if you need any assistance or if you have any 
comments with respect to any aspect of the goods, please contact your local distributor via email.  
 
If you are missing parts you can order parts by writing to the address below or call  
888 –623 –5044. Please include the product name, colour, and a brief description of the part you 
are missing.  

You can also visit our website at 

www.incyinteriors.com 

for latest product information. 

 

For service is United States: 
Incy Interiors Pty Ltd 
C/- ATC International 
859 East Sepulveda Blvd 
Carson, CA  90745   USA  
Ph  888 –623 –5044 
www.incyinteriors.com 

 

For service in Australia: 
Incy Interiors Pty Ltd 
2a Piper Street, Bathurst, NSW, 2795  
AUSTRALIA 
1300 94 20 50  
www.incyinteriors.com.au 

 

 

Summary of Contents for Georgia 1515-1
















Reviews: