Incy Interiors Georgia 1515-1 Manual Download Page 2

 

UNITED STATES CRIB SAFETY WARNINGS 
IMPORTANT 

 

FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT IN 
SERIOUS INJURY OR DEATH 

Read all instructions before assembling crib. Keep instructions for future use. 
Never use plastic shipping bags or other plastic film as mattress covers because they can cause 
suffocation. 
Infants can suffocate in gaps between crib sides and a mattress that is too small. 

Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional 
padding under an infant. 

To reduce the risk of 

SIDS

, pediatricians recommend healthy infants be placed on their backs to 

sleep, unless otherwise advised by your physician. 

Strangulation Hazard: 

 

Strings can cause strangulation! DO NOT place items with a string around a child’s 
neck, such as hood strings or pacifier cords. 

 

DO NOT suspend strings over a crib or attach strings to toys. 

 

To help prevent strangulation tighten all fasteners. A child can trap parts of the body or 
clothing on loose fasteners. 

 

DO NOT place crib near window where cords from blinds or drapes may strangle a child. 

Fall Hazard: 

 

When child is able to pull to a standing position, set mattress to lowest position and remove 
bumper pads, large toys and other objects that could serve as steps for climbing out. 

 

Stop using crib when child is able to climb out or reaches the height of 35 in. (89 cm). 

 

Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing 
parts, or sharp edges before and after assembly and frequently during use. Securely tighten 
loose bolts and other fasteners. DO NOT use crib if any parts are missing, damaged or broken. 
Contact Incy Interiors Pty Ltd for replacement parts and instructional literature if needed. DO 
NOT substitute parts. 

 

If refinishing, use a non-toxic finish specified for children’s products. 

 

Follow warnings on all products in a crib. 

CAUTION: ANY MATTRESS USED IN 
THIS CRIB MUST BE AT LEAST 27-5/8INCHES 
BY 52 INCHES WITH ATHICKNESS NOT 
EXCEEDING 6 INCHES.

 

 

Summary of Contents for Georgia 1515-1
















Reviews: