Hi-Rise Fence Cap
You’ll find the Hi-Rise fence cap great for
supporting large vertical panel work . Here’s how
to attach the Fence Cap and braces .
Attach the fence cap
braces
Place a
1
⁄
4
" washer on each
of (2)
1
⁄
4
-20 x
1
⁄
2
" socket
head cap screws and insert through
the hole on the front of each fence
brace . Loosely thread on a
1
⁄
4
-20
rectangular nut (the raised rim on the
nut should face away from the brace),
then slide the nut into the forward
T-slot located in the top of the
Wonder Fence assembly . See
Fig.-23
and
Detail 23
. Locate the two braces on
the fence 7
5
⁄
8
" apart . Tighten the fasteners
with the supplied hex tool .
10
Fig. 23
Attach fence cap braces
Fence cap brace
1
Fig. 25
Attach and align fence cap
Extend fence cap out to
touch straight edge
FIRST: Attach fence cap to cap extender
with (2)
1
⁄
4
-20 x
5
⁄
8
" socket head
screws, washers and
lock nuts
Fence
cap
1
⁄
4
-20 x
1
⁄
2
" socket head
cap screw with
1
⁄
4
" washer
Detail 23
--Slide
rectangular
nut into the
forward
T-slot
Forward T-
slot
Fig. 24
Attach cap
extender
First: Insert fasteners and slide
#10-32 hex nuts into T-slot on
top of braces
Second: Position cap extender to
allow future access to socket head
cap screws through
slotted hole.
#10-32 x
1
⁄
2
" phillips
screw with
1
⁄
4
" washer
Attach and align fence
cap
Place the 24" long fence cap
on top of the cap extender and attach
using the (2)
1
⁄
4
-20 x
5
⁄
8
" socket head
cap screws with
1
⁄
4
" washers and lock
nuts . Use a straightedge to align the
leading edge of the fence cap with the
front face of the Wonder Fence and
tighten the two cap mounting screws .
See
Fig. 25
. To remove the fence cap
and braces, just loosen the two socket
head cap screws that secure the
braces and slide the entire assembly
off of the Wonder Fence .
3
Attach the cap extender
Place a
1
⁄
4
" washer on each of the (2)
pan head phillips screws and insert
through the slotted holes located in
the fence cap extender . Loosely thread a
#10-32 hex nut onto each fastener, then
slide the hex nuts into the T-slot
located on the top of each fence cap
brace . Position the cap extender
so you can later gain access to the
socket head fasteners on each fence
cap brace through the slotted holes .
Pull the cap extender forward until
it firmly contacts the back of each
brace and tighten the (2) phillips head
screws . See
Fig.-24
and
Detail 24
.
2
Detail 24
NOTE:
When removing the fence
cap assembly from the INCRA
TS Tablesaw Fence, loosen the
fasteners and tilt the assembly to
clear the fence mounting bracket.
SECOND: Use a straightedge to
align fence cap with Wonder Fence,
then tighten fasteners.
7
5
⁄
8
"
Third: Slide cap
extender forward to
contact
brace, then
tighten screws
Brace
Cap extender
Fence
cap
extender
