Introduction 1
Man-1161IN Rev.A
Taktis Vision Installation & Operation Manual
1
Section 1
Introduction
TheTaktis Vision Annunciator is a display and control unit which duplicates the indications and primary controls of
Taktis Fire Alarm Control Panels connected to the same network.
The Annunciator connects to the FACP (Fire Alarm Control Panel) via the network interface and requires that the
main control panel have an network card fitted. For full details of Taktis networking refer to Taktis Installation Manual.
The Annunciator is connected to the network and any number of repeaters can be connected up to the maximum
number of nodes allowed by the network specification, which is 128 (including control panels).
In addition to displaying the status of the fire alarm system, the Annunciator can provide limited local control func-
tions via local control outputs.
Taktis Vision Annunciator Features
•
Full colour 7” (800 x 480 pixel) GUI (Graphical User Interface).
•
Replicates information displayed at the FACP.
•
Automatic display brightness adjustment.
•
Internal buzzer attenuate.
•
Connects via control panel network terminals.
•
Low current, 24V DC powered.
•
Configurable functionality.
•
Enable key-switch.
•
Sheet steel enclosure.
•
Surface, flush or semi flush enclosure options available.
Related Documentation
For information relating to the Taktis Fire Alarm Control Panel please refer to the following manuals::
Using your Smart-phone, tablet or device install a third party QR Code Reader and scan the code to view the doc-
uments.
Manual Variant
Website
Installation Manual
http://www.tba.pdf
Operation Manual
http://www.tba.pdf
Installation Manual
Operation Manual
TBA
TBA
Summary of Contents for Taktis Vision
Page 20: ......
