9
II
. Using the BP170(B)
A. Preparing for Measurement
*
If the BP170(B) has been stored in a hot or cold environment, keep it at room temperature for
at least one hour.
(1) Inserting / replacing the batteries
❶
Remove the battery cover.
❷
Insert four (4) "AA" alkaline batteries in the correct orientation as indicated on the battery
tray.
❸
Close the battery cover.
(3) Using the AC adapter (Optional)
❶
Insert the AC adapter plug into the AC adapter jack on the side of the main unit.
❷
Plug the AC adapter into an electrical outlet.
*When the BP170(B) is used with the AC adapter connected, " AA" alkaline batteries are not required to operate
the BP170(B).
• To disconnect the AC adapter, unplug the AC adapter from the electrical outlet first and then
remove the AC adapter from the main unit of the BP170(B).
Caution
• Lors de la déconnexion de l'adaptateur CA, d'abord déconnecter l'adaptateur CA de la prise,
et ensuite déconnecter l'adaptateur CA de la partie principale du BP170(B).
Attention
❶
❷
(4) Mute setting
To turn off the beep sound, press and hold and buttons at the same time for more
than 3 seconds while the blood pressure monitor is turned off.
Mute Icon
(2) Battery level indicator
- The user may check the remaining battery level in the upper right corner of the screen
while using the blood pressure monitor.
- When using the AC adapter, the AC adapter connection symbol ( )displays instead
of the battery level indicator
: The capacity of the batteries is sufficient.
: Battery level is low.
: Battery is depleted.
Please replace with new batteries.
<220V>
<110V>
❶
❷
129x183_BP170_manual_ENG_D_210702.indd 9
129x183_BP170_manual_ENG_D_210702.indd 9
2021-07-01 오후 5:56:00
2021-07-01 오후 5:56:00
