•
prolonged exposure to stimuli such as soap, sweat, or skin reactions may be caused by allergies,
environmental factors, and other factors.
•
Keep straps clean and dry.
•
Do not connect the product to other equipment in a way that is not indicated in the user manual.
•
Keep the electrode parts of the product away from electrical conductive materials. Electrical stimulation,
such as static electricity, can cause product damage or failure.
•
Do not check phone notifications or other data displayed on the product's display while driving or in situations
where inadvertent hazards may occur.
•
Straps may be contaminated by direct sunlight, water, oil, or cosmetics, and may be discolored or deformed.
•
Do not shock while the charging USB cable is plugged in.
•
Be careful not to bend the charging USB cable. If the USB cable is damaged, stop using it.
•
This device is home (class B) electromagnetic compatible and is available in all regions.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—
Reorient or relocate the receiving antenna.
—
Increase the separation between the equipment and receiver.
—
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—
Consult the dealer or an experienced radio/TV technician for help.
•
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada
’
s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation
of the device.
•
Services related to human safety are not available because of the potential for radio interference during
operation. If you need emergency medical conditions or communication, please notify yourself via your
phone.
•
The device has been evaluated to met general RF exposure requirement.
The device can be used in
portable exposure condition without restriction.
•
To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device
is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure
requirements and void the user
’
s authority to operate the device.
•
Bluetooth uses the same frequency band as many electronic devices, which can cause radio interference
during the machine period.
•
The user is responsible for data transmission problems or illegal use due to Bluetooth use.
Reference
•
Wipe the product with a soft cloth about once a week.
•
Specifications of the product and the contents of the user manual may be subject to some changes without
notification to the user.
