74
Please ensure that the area has been added into arm mode. Otherwise, there will be no
alarm triggering after arm.
Please ensure that it is in disarmed status. Otherwise, arm will fail.
Step 1 Press
at the main interface.
The system displays arm mode, as shown in Figure 6-49.
Step 2 Select arm mode.
Figure 6-49
Step 3
The system displays password input interface.
Enter arm and disarm password; press [OK].
The device beeps continuously, which represents successful arm. The key displays
corresponding arm mode.
Default password of arm and disarm is 123456. Please refer to “6.2.5.3 Password
Setting” for details.
If delay alarm is set in the area, the device will beep continuously at the end of
exit delay time.
6.9.2 Disarm
Please ensure that it is in armed status. Otherwise, disarm will fail.
Step 1
Step 2
Press disarm symbol at the lower right corner of the main interface.
The system displays password input interface.
Enter arm and disarm password; press [OK].
Summary of Contents for VUH15 series
Page 1: ...Video Intercom User Manual Digital...
Page 20: ...11 Figure 2 12...
Page 23: ...14 Figure 3 3...
Page 38: ...29 Figure 5 17 Figure 5 18...
