27
Figure 5-15
Step 4 Add VUO or fence station.
Add main VUO.
1.
In Figure 5-15, enter main VUO name, VUO IP, “User Name” and “Password”.
2.
Switch the “Enable Status” to be
.
“User Name” and “Password” shall be consistent with WEB login user name
and password of VUO. Otherwise, it will fail to connect.
“Enable Status” of main VUO is “ON” by default. After setting VUO info, it will
take effect after turning it off and then turning it on again.
Add sub VUO.
1.
Press
to switch to sub VUO setting interface.
2.
Enter sub VUO name, IP address, “User Name” and “Password”.
3.
Switch the “Enable Status” to be
.
Add fence station.
1.
Press
to switch to sub VUO setting interface.
2.
Select device type to be “Fence Station”, enter Sub VUO name (fence station
name), middle no. (fence station no.), “User Name” and “Password”.
3.
Switch the “Enable Status” to be
.
Summary of Contents for VUH15 series
Page 1: ...Video Intercom User Manual Digital...
Page 20: ...11 Figure 2 12...
Page 23: ...14 Figure 3 3...
Page 38: ...29 Figure 5 17 Figure 5 18...
