Fasten
the supply water line
securely so that there is no looseness.
* If it is loose, there is danger of water leakage.
Fasten the supply water line securely!
Manual Set
*The deodorizing cartridge has already
been installed in the product.
Toilet Seat (Body)
Side Panel (left)
Side Panel (right)
Batteries (2)
Wood Screw
Plastic Anchor
Water Shutoff
Valve
Water Supply
Pipe
Hemispherical
Face Plate
Water Supply Hose
(400 mm)
Bracket
Remote Control
Unit
Parts Check
(Make sure all the parts are included in the packing box.)
Clip
AY Bolts for
Mounting Parts
Washer
Mounting Base
Adjuster
(Contained in the bottom
of the toilet bowl)
Flange
Gasket
Flange Nut
Washer
T-bolt
Mounting Nut
Decorator Caps (Large)
Nut
Washer
AY Bolts for Anchoring the Toilet
Washer
Installation Pattern Paper
Toilet
Fixing Fastener
(pre-attached to the
toilet bowl)
Available on request
600mm Part No.:322-1050
800mm Part No.:322-1049
Names of Parts
Shower Strainer
Toilet Seat
Water
Shutoff Valve
Power Plug
Shutoff Valve
Flush Lever
Toilet Strainer
(See figure below.)
Body
Water Supply Hose
Toilet Lid
Remote Control Unit
Nozzle (for posterior)
Mounting Base
Nozzle (for bidet)
Shower Strainer
(See figure below.)
Toilet Strainer
Drain Socket
Adjuster
Flange
Rating Label
Caution
Label
To your bottom-right from the front of the body
●Carry out the construction in order beginning with the water shutoff
valve, then proceeding to the body.
●Make sure the distance to the
soil pipe is within a range of
200 and 580 mm. Match up
the adjuster with the distance
to the soil pipe, then cut it and
connect it securely using PVC
cement.
What is the distance to the soil pipe?
Positioning of water supply and drain pipes
Existing soil pipe
200 ~ 580
Adjuster
100
100
280
200~580
280
300 or more
330
Drain pipe
(VP100, VU100, VP75, or VU75)
Water supply 1/2B
(in case of supply from the wall)
Water supply 1/2B (in case of supply from the floor)
Remote
Control Unit
Light Receptor
If the remote control unit is
mounted on the left side wall
If it is necessary to mount the remote controller on the wall opposite to the remote controller receptor,
be sure to confirm that it can receive signals from the installation location before mounting it.
If there is a washstand or other object installed on the side where the remote controller receptor is
located and the remote controller needs to be mounted at a considerable distance from the toilet, the
Satis may not be able to pick up remote controller signals. In such a case, install a screen that can
reflect the signals within 1300 mm from the center of the toilet.
*Please prepare the screen on site.
The screen should be at least 1100 mm high and be wide enough to reach the position where the
remote controller is mounted. (However, depending on the wall finish, color and other conditions, the
size of the screen may differ somewhat, so please check to determine the best size.)
As much as possible, install the remote controller on the wall on
the side where the remote controller receptor is located.
Remote Control Unit Mounting Location
If the remote control unit is
mounted on the right side wall
1300 mm or less
Screen
Light Receptor
Remote
Control Unit
