System Requirements
• Windows® XP/Vista/7/8 (32/64 bit)
• One available PCI Express slot (PCI Express 2.0 is recommended).
Package Contents
• 1 x USB 3.0 PCI Express Card
• 1 x Driver CD
• 1 x User Manual
Note:
Contents may vary based on country/market.
Hardware Installation
1. Turn off the power to your computer.
2. Unplug the power cord and remove your computer’s cover/side panel.
3. Remove the slot bracket from an available PCIe slot.
4. To install the card, carefully align the card’s bus connector (golden portion) with
the selected PCIe slot on the motherboard. Push the card down firmly.
5. Use the included screw (or the screw from the slot bracket) to secure the card to
the case.
6. Replace the computer cover/side panel and reconnect the power cord.
Driver Installation
Please make sure the hardware (card) is installed before installing the driver.
If you’re unable to install the drivers from the CD, please go to the following address
to download the driver that corresponds to your product model: http://www.inateck.
com/support
1. Insert the provided CD into your disk drive.
2. Run the “Autorun.exe” file, click “Drivers”, and select the appropriate driver version.
