Inateck BCST-71, User Manual

Page: 9 / 128

7 8
EN
Function Setup
( Note: The barcode marked by “*”means default setting of Inateck BCST-71.)
Users must read setup barcodes in order to change the default settings in Inateck BCST-71
Barcode Scanner.
Scan“Enter setup”barcode;
Scan “Exit with save” barcode
to finish the setup.
Change scanner setting by
scanning certain function
setup barcode;
Status indication
Buzzer Indication
Beeping Meaning
One short high note（100ms） Read barcode successfully
One short high note（20ms） Data upload from scanner to Computer
One long high note（400ms） Wrong Setup （on setup status, blue LED stays on）
Invalid scanning due to full buffer (Scanned barcode not saved.)
Pairing Failure (Occurs only during the pairing process)
Two short notes（tone from low to high） Correct Setup
Two short beeps (tone from high to low) The connection between Inateck BCST-71 and computer is disrupted.
Two or more long high tones（800ms） USB being set up（in Wired Mode）
Three-chord sound（from low to high）
Enter setup（Blue LED is on）
Exit setup（Blue LED is off）
Three-chord sound（from high to low）
Bluetooth connected successfully
Two short tones（the same tone） Bluetooth connection disrupted
LED Indication
Indicator color Meaning
Green LED flashes once (LED2) Barcode successfully read and uploaded to computer
Blue LED flashes once (LED2) Barcode successfully read and saved in buffer, but not uploaded to computer
Blue LED stays on (LED2) Inateck BCST-71 scanner on setup status
Yellow LED blinks
(light/shade ratio0.5s : 0.5s） (LED1)
Low battery
Red LED stays on (LED1) Inateck BCST-71 scanner in charge (Red LED off when battery is full)
Green LED flashes（LED2）
The Bluetooth has been recognized but not connected, please delete the pairing
records on the phone or the computer and pair again.
Blue LED flashes（LED2）
The Bluetooth is in pairing status and the barcode scanner can be found on phones
and computers