Inateck BCST-71, User Manual

Page: 17 / 128

15 16
EN
4. Scan “Exit with Save” Barcode to end the setting
Exit with Save
Note: Refer to the setting of “delete 0 digit character” if no character should be deleted.
Inventory Mode
Users may use inventory mode to keep scanned barcodes in the buffer of Inateck BCST-71,
and upload them to computer in batches. Under inventory mode users are not restricted
to the time and location when upload data. Of course, history data can be cleared in buffer.
More details about inventory mode are as below.
1. Scan the barcode to enter Inventory Mode
2. Scan the barcode to return to Common Mode
3. Scan the barcode to clear data in buffer (for Inventory Mode only).
Enter Inventory Mode
（*）Return to Common Mode
Clear Data in Buffer(for Inventory Mode only)