10
Using Your Cooktop
TO START COOKING
• After power on, the buzzer beeps once, the indicators
light up for 1 second then go out, indicating that the
hob has entered the state of standby mode.
• Touch the ON/OFF button, and the switch indicator
will display.
• Place a suitable pan on the cooking zone that you wish
to use.
Note: Each cooking zone is independent of others.
Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
• Select power level by turning the knob control to
the right
• If you don’t choose a heat setting within 1 minute,
the Ceramic hob will automatically switch off.
You will need to start again at step 1.
• You can modify the heat setting between 1 and 9
level at any time during cooking.
Note: Do not leave the cooking unattended.
WHEN YOU HAVE FINISHED COOKING
• Select the cooking zone that you wish to swich off.
• Turn the cooking zone off by turning the knob control
to the left “0” position. The Residual heat indicator will
flash.
• Turn the whole cooktop off by touching the ON/OFF
button.
• Beware of hot surfaces
Residual heat indicator will flash which means cooking
zone is too hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can
also be used as an energy saving function if you want
to heat further pans, use the hotplate that is still hot.
RESIDUAL HEAT WARNING
When the hob has been operating for some time, there will
be some residual heat. The indicator appears to warn you
to keep away from it.