Installation
a)
Always use services of qualified plumber/electrician to install this unit.
b)
For easy installation and servicing, enough space should be provided around this unit
(50mm from ceiling, 500 mm from sides & minimum 1.8m rom ground).
c)
Ensure following tools accessories are made available before installation of this unit (not
provided by company).
1. Drilling machine with concrete drill it sets, spanner and tool kit.
2. Two numbers of metal flexible pipes.
3. PVC pipe for drain.
Preparation of wall structure
For installation of this unit you need to prepare the wall suitably.
a) In case of hollow brick walls.
1.
Dig up sufficient space to accommodate the wall mounting bracket (bracket supplied
with water heater) of minimum depth 100mm.
2.
Fill up the complete dig up space with cement concrete.
3.
Ensure cement concrete is properly cured/set.
4.
Then, the wall bracket can be fixed with the help of bolts provided along with the unit.
b) In case of solid walls
Follow process as below
1.
Drill hole in wall as shown below.
2.
Insert the nut/bolt assembly in drilled hole, take out
the bolt (as shown) picture 1.
3.
Fix the wall plate with the bolt and washer by testing
till the wall plate is firmly fixed, in order to carry the
weight of water heater safely (with water).
Mounting
Now, the water heater can be hooked on the wall bracket.
1.
After hooked on bracket, tug downward the water heater and ensure both fingers of
bracket are properly sealed in the mounting slot.
5
A
B
Hollow brick walls
Solid walls
Drill Hole
Insert Nut
Fasten Bracket
Mount Water Heater
Summary of Contents for PSG 15GL
Page 1: ...Instruction Manual...