I
n the Garage AG – Zumikerstrasse 24, Zollikon 8702 Switzerland (V. 12/04/22)
6 / 7
11.
Snap on the corresponding plug Adapter for your region onto the
AC Adapter
12.
Plug the
AC Adapter
in an appropriate electrical power socket
13.
Outdoor version: Install the
Fan Cover Support
inside the hood above the fans
14.
ATTENTION:
Outdoor version: Anchor the device to the ground (refer to
Warnings & Care
for more
information)
15.
Close all zippers to allow the air to circulate properly
Note: when new, you may experience some “sticky” zippers. Do not force them. We recommend using
two hands to open/close zippers (one inside and one outside). Also, it is easier to close zippers when
the Fans are not running.
Deflation
1.
Connect one end of the
Air Hose
to the receptor marker ‘Deflate’ on top of the
Air Pump
2.
Turn on the
Air Pump
using the toggle switch and the Ultimate Car/Bike Shield will deflate in less than
five minutes.
N.B.:
•
You may need to assist the device by lifting the pillars during deflation
•
If it is not fully deflated at five minutes, turn off the pump and unfold any portions which may be
“stuck”
