I
n the Garage AG – Zumikerstrasse 24, Zollikon 8702 Switzerland (V. 12/04/22)
3 / 7
Instructions
Note: It should take about 20 minutes to set up the Ultimate Car Shield/Ultimate Bike Shield once
unpacked. We recommend two people.
Only products marked “Outdoor” are for use outdoors. All other products are for indoor use only!
1.
Unfold the Ultimate Car/Bike Shield and place it where it will be located when inflated. For the first
inflation, connect to exterior set of valves
2.
Screw on one end of the
Air Hose
to the receptor marked ‘Inflate’ on top of the
Air Pump
3.
Connect the other end of the
Air Hose
to any of the grey valves by pushing by turning the bayonet
4.
Insert the
Pressure Tube
into the blue port on the lower part of the
Air Pump
5.
Secure the other end of the Pressure Tube to any of the grey valves by pushing by turning the bayonet
6.
Connect the electric cable to the
Air Pump
and plug it into an appropriate electrical outlet. For the
Outdoor version, ensure that the power adapter and pump are placed
inside
the Ultimate Car Shield.
Turn on the
Air Pump
using the toggle switch.
There will be a delay of about 3 seconds before it
starts to send air.
It will run for less than 5 minutes or until the optimal pressure is reached and will
maintain that pressure without intervention
7.
Once inflated, place the pump on a flat surface
