IN HOUSE LED HUB-RD-N-PIR User Manuel Download Page 18

 

Distribué par / Distribuito da / Distributed by / Vertrieben von NETELEC SRL FR - rue Philemon Laugier - 83400 Hyeres les Palmiers

 

 

 

4.  CORRECT USE 

 

This device is intended for adults only. Use in accordance with the instructions is not dangerous. 

 

5.  GENERAL SAFETY NOTES 

 

This  device  is  not  intended  for  use  by  persons  (including  children)  with  limited  physical,  sensory  or 

mental capabilities or with no experience or knowledge, unless under the supervision of a person in 

charge of the device. their safety or if they have received instructions from a person on how the device 

should be used. 

Children should be supervised to make sure they do not play with the device. 

If a power cable is damaged, it must be replaced by a professional to avoid any risk of injury or accident, 

as well as damage to the device. 

Always unplug your appliance before cleaning and if it is defective. 

Never immerse the device in water. It is not suitable for underwater use. Risk of electrocution! 

Do not operate the appliance if it has fallen into the water and the plug or appliance is damaged. 

Make sure that neither the power cable nor the appliance is placed on hot surfaces or near sources of 

heat. Lay the power cable so that it does not come into contact with hot or sharp objects. Risk of electric 

shock ! 

Although the power cable is sturdy, it should never be bent as this can cause cable breakage. Risk of 

electric shock ! 

Never try to open the device with metal objects. This voids your warranty and carries a risk of electric 

shock! 

Electrical devices are not toys! Use and store the device out of the reach of children. Never let the power 

cable hang so that it cannot be pulled. 

Repairs can only be done by professionals. Devices that have not been professionally repaired pose a 

risk to the user. 

Only connect the device to an outlet with the correct power supply voltage. 

• Use the appliance only on stable surfaces. 

•  Never  use  the  device  if  the  power  cable  is  damaged.  Contact  a  specialist  to  see  if  the  cable  is 

serviceable. 

•  Only  use  components  and  accessories  recommended  by  the  manufacturer  and  designed  for  this 

purpose. 

• Before plugging in the appliance, always make sure that the plug, the power cable and your hands are 

dry. 

• Unplug your appliance before cleaning. 

• Do not use abrasive cleaners for cleaning. 

• Never immerse the device in water. 

Summary of Contents for HUB-RD-N-PIR


























Reviews: