Distribué par / Distribuito da / Distributed by / Vertrieben von NETELEC SRL FR - rue Philemon Laugier - 83400 Hyeres les Palmiers
4. Adjust time control to required setting
5. To set the light level at which the Sensor light automatically switches “ON” at night, turn the “ LUX” or
light control to. If the sensor light is required to switch on earlier e.g.dusk, simply wait for the desired
light level, then slowly turn the “LUX” or light control towards while someone walks across the center of
the area to be detected. When the sensor light switches “ON” release the “LUX” or light control knob,
you may need to make further adjustments to achieve your ideal light level setting.
MANUAL OPERATION (AUTOMATIC OVERRIDE)
To override the automatic mode, the light must be switched ON in the “Automatic” mode. Now switch
your wall switch OFF and back ON within two seconds. Your Sensor light will now stay on continuously,
just like a normal light, this override function can be selected during daytime or night time.
Turn your wall switch OFF for at least s seconds and then turn the wall switch back ON. This will put the
Sensor light into ‘Automatic” mode. The unit will then start sensing after dusk. The sensor lights will
switch ON and automatically switch OFF after the pre-set time elapses and then operate again when
heat movement is detected.
IMPORTANT :
•
This product contains no serviceable part and no attempt should be made to repair or alter the
product. if the product is faulty, it should be discarded.
•
This product is IP 54 rated, it is suitable for outdoor installation, for maximum longevity, we
suggest to mount this product in a sheltered or semi sheltered location.
